Section 5 - Maintenance
Changing
1. Remove the gear lube monitor from the bracket.
2. Empty the contents into a suitable container.
3. Install the gear lube monitor in the bracket.
4. Place the sterndrive unit in full trim limit out position, remove the fill and drain screw
and sealing washer and drain the gear lube.
5. Remove the vent screw and sealing washer. Allow the gear lube to drain completely.
Page 82
a
a -
Gear lube monitor
b -
Typical closed cooled model
c -
Typical seawater cooled model
b
a
a -
Fill and drain screw
b -
Sealing washer
b
a
a -
Vent screw
b -
Sealing washer
a
c
b
mc79507-1
mc77106-1
32539
90-899883234 JANUARY 2008