Changing Steering Fluid; Engine Coolant; Checking - MerCruiser Axius 350 MAG User Manual

Section 5 - Maintenance
IMPORTANT: If fluid is not visible in the reservoir, contact your authorized Mercury
MerCruiser dealer.
5. The fluid level must be in the warm range and not above the full hot mark when the
engine is warm. When the engine is cold the fluid level must be in the cold range and
not above the full cold mark.
6. Add the specified fluid if required.
Tube Ref No.
7. Reinstall the fill cap.
NOTE: If the fluid level was low or you are installing or performing service to the system,
be prepared to stop the engine and add fluid after the first operation.

Changing Steering Fluid

You do not need to change the steering fluid unless it becomes contaminated with water
or debris. Contact your authorized Mercury MerCruiser dealer.

Engine Coolant

Checking

A sudden loss of pressure can cause hot coolant to boil and discharge violently resulting
in serious injury from burns. Allow the engine to cool down before removing the coolant
pressure cap.
Page 78
b
a - Reservoir
b - Fill cap
c - Warm range
d - Cold range
e - Full hot mark
f - Full cold mark
Description
Dexron III Automatic
28
Transmission Fluid
a
c
d
e
f
Where Used
Steering system
CAUTION
!
32276
Part No.
Obtain Locally
90-899883234 JANUARY 2008