Engine Oil Drain Pump - MerCruiser Axius 350 MAG User Manual

Section 5 - Maintenance
1. Loosen the oil filter to vent the system.
a
b
2. Remove the bilge drain plug.
3. Pull tether through the bilge drain.
4. Place the oil drain hose in a suitable container.
5. Remove the drain plug from the oil drain hose.
6. After oil has drained completely, install the drain plug in the oil drain hose.
7. Push the hose through bilge drain and install the plug.

ENGINE OIL DRAIN PUMP

1. Loosen the oil filter to vent the system.
2. Remove the dipstick.
3. Install the oil pump onto the dipstick tube.
4. Insert the hose end of the crankcase oil pump onto an appropriate container and, using
the handle, pump until the crankcase is empty.
5. Remove the pump.
6. Install the dipstick.
Page 76
c
a - Bilge drain plug
b - Tether
c - Clip
a
b
a - Typical oil pump
b - Dipstick tube
d
e
d - Oil drain hose plug
e - Oil drain hose
f - Bilge drain flange
c
mc70571-1
c - Oil drain hose
90-899883234 JANUARY 2008
f
7284