Appendix C C7100/7300/9300/9500 Series Error Messages; C7100/7300/9300/9500 Series (Error Messages) - Oki C9500 Maintenance Manual

APPENDIX C C7100/7300/9300/9500 SERIES ERROR MESSAGES

1.

C7100/7300/9300/9500 Series (Error messages)

(Caution) * : Raise in the factory mode only.
** : Not raise in the standard config machines.
Err LCD Messages
Code
300 POWER OFF/ON
300:NETWORK ERROR
310 CLOSE COVER
310:UPPER COVER OPEN
311 CLOSE COVER
311:SIDE COVER OPEN
311 CLOSE COVER
311:SIDE COVER OPEN
312 CLOSE COVER
312:TRAY2 COVER OPEN
313 CLOSE COVER
313:TRAY3 COVER OPEN
314 CLOSE COVER
314:TRAY4 COVER OPEN
315 CLOSE COVER
315:TRAY5 COVER OPEN
320 CHECK FUSER UNIT
320:FUSER UNIT MISSING
321 POWER OFF AND WAIT FOR
A WHILE
321:MOTOR OVERHEAT
323 OPEN AND CLOSE COVER
323:PAPER THICK ERROR
324 OPEN AND CLOSE COVER
324:PAPER THICK ERROR
325 OPEN AND CLOSE COVER
325:PAPER THICK ERROR
326 OPEN AND CLOSE COVER
326:PAPER THICK ERROR
327 DOWNLOAD CHIP DATA
* 327:DENSITY CALIBRATION
CHIP ERROR
41956001TH Rev.6
LED LED
Ready Atten
OFF Blink A network error is occurring.
OFF Blink The cover is open.
OFF Blink The cover is open.(PX711)
OFF Blink The cover is open.(PX713)
OFF Blink The cover is open.
OFF Blink The cover is open.
OFF Blink The cover is open.
OFF Blink The cover is open.
OFF Blink The fuser unit is not correctly installed
OFF Blink Motor (Driver LSD) overheat error
OFF Blink A Sensor output at Medea Empty is
outside the spec.(factory mode only
raise)
OFF Blink The difference among Sensor outputs is
outside the spec.(factory mode only
raise)
OFF Blink Media detected values are outside the
spec.
OFF Blink Media detected values in U-Heavy
Mode are outside the spec.
OFF Blink Density Adjustment's calibration chip
correction errorOmission of factory
default setting. To prevent setting
mistake.Error that does not occur at
user level.Displayed only in Factory
Mode.
Oki Data CONFIDENTIAL
Description Comments
Anomalies
with Media
Weight
Detection
sensor.
185 /