Oki C9500 Maintenance Manual page 186

Err LCD Messages
Code
330 CHECK BELT UNIT
330:BELT UNIT MISSING
340 CHECK IMAGE DRUM
340:YELLOW DRUM MISSING
341 CHECK IMAGE DRUM
340:MAGENTA DRUM
MISSING
342 CHECK IMAGE DRUM
340:CYAN DRUM MISSING
343 CHECK IMAGE DRUM
340:BLACK DRUM MISSING
350 INSTALL NEW IMAGE DRUM
350:YELLOW DRUM LIFE
351 INSTALL NEW IMAGE DRUM
351:MAGENTA DRUM LIFE
352 INSTALL NEW IMAGE DRUM
352:CYAN DRUM LIFE
353 INSTALL NEW IMAGE DRUM
353:BLACK DRUM LIFE
355 INSTALL NEW BELT UNIT
355:BELT UNIT LIFE
356 INSTALL NEW BELT UNIT
356:BELT UNIT LIFE
360 INSTALL DUPLEX UNIT
360:DUPLEX UNIT OPEN
361 REMOVE FINISHER
361:PAPER JAM
362 REMOVE FINISHER
362:PAPER JAM
363 REMOVE FINISHER
363:PAPER JAM
364 REMOVE FINISHER
364:PAPER JAM
365 REMOVE FINISHER
365:PAPER JAM
366 REMOVE FINISHER
366:PAPER JAM
367 REMOVE FINISHER
367:PAPER JAM
41956001TH Rev.6
LED LED
Ready Atten
OFF Blink The belt unit is not correctly installed.
OFF Blink The drum is not correctly installed.
OFF Blink
OFF Blink
OFF Blink
OFF Blink The life of the drum (Alarm)
Warning status takes effect at Cover
Open/Close, while allowing 500 pages
OFF Blink printing at maximum
OFF Blink
OFF Blink
OFF Blink Notifies the transfer belt has reached its
life.This is the error displayed based on
the counter to indicate that the belt has
reached its life, and printing will stop.
OFF Blink Notifies the transfer belt has reached its
life.This is the error to indicate that the
belt has reached its life because the
waste toner has filled up the container,
and printing will stop.
OFF Blink Duplex unit is open (removed). When
this error is detected, printing
stops.(PX713 only)
OFF Blink Jam has occurred nearby FINISHER
unit.(Only install the FINISHER unit)
361:Before Input
OFF Blink 362:Input Area
363:Regist Roller
364:Invert Path
OFF Blink 365:Invert Stack
366:Output Bin1 Exit
367:Output Bin2 Exit
OFF Blink
OFF Blink
OFF Blink
OFF Blink
Oki Data CONFIDENTIAL
Description Comments
186 /