Test Print - Oki C9500 Maintenance Manual

3.1.2.5 Test print

This self-diagnostic routine is used to print the test patterns in the PU. The other test patterns are
stored in the controller.
1 1 1 1 1
1. Press the
is displayed in the top line. (Key
2. The bottom line displays the setup items applied only for test print. Press the
the corresponding item is displayed. (Key
item.)
3 3 3 3 3
3. When the
in the bottom line. The set value increments by pressing the
7 7 7 7 7
the key. (The value that is set at the end will be applied.) Repeat Stop 3 as required.
TEST PATTERN
1
Display
PRINT EXECUTE
TEST PATTERN
CASSET
PAGE
COLOR
DUPLEX
•
is the default. The set items are valid only in this test mode. (They will not be written in
EEPROM.)
Note:
Page setting: Key
Color setting: The following indications appear in the panel when Key
Print setting for each color:
41956001TH Rev.6
5 5 5 5 5
and keys until the self-diagnostic (Level 1) mode is entered and [TEST PRINT]
1 1 1 1 1
increments the test item and Key
7 7 7 7 7
and keys are pressed, the setup items appear in the top line and set values appear
Set Value
—
0
TRAY1
TRAY2
TRAY3
FF
0000
ON
OFF
2 PAGES STACK
OFF
1PAGES STACK
1 1 1 1 1 5 5 5 5 5
or shifts the digits.
when set to [ON].
Shifts by pressing Key
Switch between [ON] and [OFF] is set by pressing Key
Panel indication returns by pressing Key
2 2 2 2 2
increments the item and Key
3 3 3 3 3
key and decrements by pressing
Press Key 3 to start print. / Press Key 7 to end print.
(In page unit.)
0: empty page
1-7: Refer to the following page (pattern print).
8-15: empty page
Set paper feed source.
Set number of pages to test print.
Select color or monochrome.
Perform duplex print with 2-page stack.
Set duplex print to OFF.
Perform duplex print with 1-page stack.
1 1 1 1 1 5 5 5 5 5
or .
2 2 2 2 2
Oki Data CONFIDENTIAL
5 5 5 5 5
decrements the test item.)
2 2 2 2 2 6 6 6 6 6
and keys until
6 6 6 6 6
decrements the
Function
1 1 1 1 1 5 5 5 5 5
or is pressed
3 3 3 3 3 7 7 7 7 7
or .
6 6 6 6 6
or .
78 /