Oki C9500 Maintenance Manual page 194

Err LCD Messages
Code
* REGISTRATION SENSOR
ERROR3
* REGISTRATION SENSOR
ERROR4
* REGISTRATION SENSOR
ERROR5
PRESS ONLINE SW
COULD NOT
STAPLE/PUNCH.TOO THICK
PAPER
PRESS ONLINE SWCOULD
NOT DUPLEX. TOO THICK
PAPER
41956001TH Rev.6
LED LED
Ready Atten
Varies Light Registration Sensor Error(Magenta)
This is not user-level error.
Varies Light Registration Sensor Error(Cyan)
This is not user-level error.
Varies Light Registration Sensor Error(Black)
This is not user-level error.
Varies Varies Staple/Punch could not be executed
because the media was too thick. This
appears when the media too thick to be
stapled/punched has been detected.
Detection of Transparency falls under
this category. Pressing the ONLINE
key will clear the message. (R
Varies Varies Could not perform Duplex printing
because the paper is too thick. Displays
when paper is detected to be too thick
for Duplex printing. The message will
disappear when the ONLINE key is
pressed.
Oki Data CONFIDENTIAL
Description Comments
194 /