Table of Contents
Advertisement
A
A – LCD
PPENDIX
The LCD panel messages are intended to be self-explanatory. Representative messages are
given as examples below.
MESSAGE
Ready to Print
Printing tttttt
tttttt Near End
cccccc Toner Low
Fuser Unit Near Life
Change Fuser Unit
Inverter is Removed
Invalid Data
Press ONLINE Button
Change Paper in tttttt
mmmmmm
pppppp
Press ONLINE button
Please see HELP for details
Install Paper
tttttt
mmmmmm
Please see HELP for details
Install Tray
tttttt
Please see HELP for details
Open Cover
Paper Remains
tttttt
Please see HELP for details
Check Image Drum
cccccc
Please see HELP for details
MESSAGES
COMMENT
Your printer is online and ready to print.
Your printer is printing and paper is currently being fed
from tttttt, where tttttt identifies a tray.
The paper supply in the tray identified by tttttt will run out
soon.
The remaining toner of colour cccccc is running low.
The fuser unit is nearing the end of its working life.
The fuser unit has reached the end of its working life and
has to be changed.
The Inverter unit has been separated from the printer and
all Finisher functions are disabled. (Finisher/Inverter is an
optional accessory.)
Invalid data has been received by the printer. Press the
ONLINE button to clear this warning.
There is a mismatch between the media in the tray and
print data.
Load media of size mmmmmm and type pppppp into tray
tttttt. The message may remain for some time after you
have closed the tray.
You can have the printer ignore this error for the current
print job by pressing the ONLINE button.
You can access help details by pressing the HELP button.
The printer has tried to take paper from an empty tray.
Load media of size mmmmmm into tray tttttt. The
message may remain for some time after you have closed
the tray.
You can access help details by pressing the HELP button.
The printer has tried to take paper from a tray that has
been removed.
Ensure that tray tttttt is correctly located or put tray tttttt
loaded with paper back into the printer.
Additional paper has been detected after a paper jam has
been cleared.
Open tttttt side cover to check for additional paper.
You can access help details by pressing the HELP button.
Check that the image drum of colour cccccc is correctly
installed.
You can access help details by pressing the HELP button.
Appendix A – LCD messages > 67
Advertisement
Table of Contents
