Installing The Printer Driver (Ps Plug-In Driver); Mac Os X 10.4/10.5/10.6 - Konica Minolta bizhub press C7000 User Manual

6.1

Mac OS X 10.4/10.5/10.6

6 Installation on Macintosh Computers
This chapter describes the settings necessary when using Macintosh and the procedure for installing printer
drivers for Macintosh.
6.1 Mac OS X 10.4/10.5/10.6
This machine supports the PS Plug-in driver if you use Mac OS X.
6.1.1

Installing the printer driver (PS Plug-in driver)

1
Start the Macintosh computer.
2
Insert the Driver CD-ROM into the CD-ROM drive.
% Exit all running applications, if any.
3
Open the folder in the CD-ROM that contains the desired printer driver.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Copy [bizhub PRESS C7000 C6000PS.pkg] on the desktop.
5
Double-click the file copied onto the desktop.
The installer starts.
% To cancel installation, press [Cancel].
6
Click [Continue] following the instructions on the pages that follow until the [Installation] page appears.
% When the name and password prompt appears during the procedure, enter the administrator name
and password.
7
In the [Installation] page, click [Install].
The printer driver is installed in the computer. When the installation is completed, a message appears.
% For OS X 10.4, when the printer driver is installed for the second and subsequent times, [Install] may
change to [Upgrade].
8
Click [Close].
This completes the printer driver installation.
Next, select a printer. (Refer to page 6-3.)
bizhub PRESS C7000/C7000P/C6000/C70hc
6
6-2