Updating The Driver After Connecting This Machine - Konica Minolta bizhub press C7000 User Manual

5.1 Windows Vista/Server 2008/7
NOTICE
When starting up the computer, do not plug in or unplug the cable.
2
Turn on the main power of this machine.
The [Found New Hardware] dialog box appears.
% If the [Found New Hardware] dialog box does not appear, turn this machine off, then on again. In
this case, turn off this machine, and then wait approximately 10 seconds before turning it on again.
If you turn this machine on immediately after turning it off, it may not function correctly.
3
Click [Locate and install driver software (recommended)].
The dialog box requesting the disk (CD-ROM) appears.
% If you do not have the disk (CD-ROM), click [I don't have the disc, show me other options]. On the
next page, select [Browse my computer for driver software (advanced)], and then specify a desired
printer driver folder.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Insert the Driver CD-ROM into the CD-ROM drive.
The information on the disk is searched for, and then the list of the software supported by this machine
appears.
5
Select a desired printer driver name, and then click [Next].
% Available printer drivers:
PS Plug-in driver, PPD driver
6
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue].
7
When the installation completes, click [Close].
8
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
% If the [Windows Security] window for verifying the publisher appears, click [Install this driver soft-
ware anyway].
9
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.

Updating the driver after connecting this machine

In Windows 7, if this machine is connected without first installing the printer driver, the printer driver will not
be correctly identified. In this case, the driver must be updated using [Update Driver ...].
1
Click [Start] and then [Devices and Printers].
2
Right-click the device name of the machine that is under [Unspecified] and then click [Properties].
% If [Unknown Device] appears instead of the device name of the machine, right-click to remove the
device, and install the printer driver. To connect this machine as described in "Making the printer
driver known to the compute". For details, refer to page 5-9 or page 5-12.
3
In the [Hardware] tab, click [Properties].
4
In the [General] tab, click [Change Settings].
5
In the [Driver] tab, click [Update Driver ...].
6
In the page in which to select how to search the driver software, click [Browse my computer for driver
software anyway].
7
Click [Browse...].
8
Select a desired printer driver folder in the CD-ROM, and then click [OK].
bizhub PRESS C7000/C7000P/C6000/C70hc
5
5-13