Paper Type Setup; Paper Tray Selection; Sheet-Feed Analysis Margins Setup; Analysis Margins Setup - Oki B2500 Series User Manual

Paper type setup

851 - ADVANCED FCT/SCAN. & PRINT/PAPER
1 Select the paper NORMAL (60-90 g/m²) or THICK
(90-162 g/m²) that you use with the buttons
.
2 Confirm your setup by pressing the OK button.
3 Quit this menu by pressing the

Paper tray selection

The Automatic selection can have two meanings
depending on the paper format defined on the paper
trays. The following table describes the different cases.
Default tray
AUTOMATIC
Same paper
format in the
trays
MANUAL
AUTOMATIC
Different paper
format in the
MANUAL
trays
852 - ADVANCED FCT/SCAN. & PRINT/TRAY
1 Select the default paper tray to use, AUTOMATIC
or MANUAL, with the buttons
2 Confirm by pressing the OK button.
3 Quit this menu by pressing the

Sheet-feed analysis margins setup

If you want to, you can offset the lateral margins of the
document to the left or right during the analysis with your
sheet-feed scanner.
853 - ADVANCED FCT/SCAN. & PRINT/ S.F.
1 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
2 Confirm by pressing the OK button.
3 Quit this menu by pressing the

Analysis margins setup

If you want to, you can offset the lateral margins of the
document to the left or right during the analysis with your
flat-bed scanner.
854 - ADVANCED FCT/SCAN. & PRINT/
1 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
TYPE
and
button.
Tray used for copy
Selection between the
main tray and the
manual tray.
The manual tray is
used.
The main tray is used
The manual tray is
used.
PAPER
and .
button.
MARGINS
and .
button.
FLATBED MARG
and .
- 15 -
2 Confirm by pressing the OK button.
3 Quit this menu by pressing the

Left and right printing margins setup

If you want to, you can offset the lateral margins of the
document to the left or right during printing.
855 - ADVANCED FCT/SCAN. & PRINT/
1 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
2 Confirm by pressing the OK button.
3 Quit this menu by pressing the

Top and bottom printing margins setup

If you want to, you can offset the lateral margins of the
document towards the top or the bottom during printing.
856 - ADVANCED FCT/SCAN. & PRINT/TOP
1 Setup the top / bottom margins offsets (by 0.5 mm
steps) with the buttons
2 Confirm by pressing the OK button.
3 Quit this menu by pressing the

Format paper setup

This menu allows you to define the default paper format
of the manual tray and the main tray. You can also setup
the default scanning width.
857 - ADVANCED FCT/SCAN. & PRINT/
1 Select the paper tray for which you want to define
a default paper format with the buttons
2 Confirm by pressing the OK button.
3 Choose the paper format with the buttons
according to the following table:.
Paper tray
A5, A4, Legal and Letter
MAN. TRAY
A5, A4, Legal and Letter
AUTO. TRAY
LTR/LGL and A4
SCANNER
4 Confirm by pressing the OK button.
5 Quit this menu by pressing the
B2520 / B2540
button.
PRINTER MARG
and .
button.
PRINT.
and .
button.
PAPER FORMAT
and
or
Available paper format
button.
.