Panasonic KX-TDA30 Features Manual page 61

Parameter
(All)
• If an ICD Group button is assigned, it also shows the log-in/log-out status of the corresponding group.
The light pattern is the same as the Log-in/Log-out button that includes the group number.
• Wrap-up Timer
– Two wrap-up timers can be programmed, an ICD Group member wrap-up timer and an extension
wrap-up timer. System programming selects which timer is used. When the ICD Group member
wrap-up timer is selected, the timer is only activated after calls to the extension through an ICD
Group. When the extension wrap-up timer is selected, the timer is activated after all calls to or from
the extension, including a retrieved call on hold.
– Only calls from ICD Groups cannot be received during the wrap-up time. Other calls are received
as normal.
– The wrap-up timer does not work for ISDN extensions or PS Ring Groups.
• Wrap-up Button
A flexible button can be customised as the Wrap-up button. It shows the current status as follows:
Light pattern
Slow red flashing
Red on
Off
• When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired telephone can
have Wrap-up time. (→ 1.24.5 Wireless XDP Parallel Mode)
• Automatic Log-out
A member extension may be logged out automatically, if the Unanswered time expires a
preprogrammed number of times consecutively. The number of consecutive unanswered calls can be
assigned for each incoming call distribution group. If the extension is a member of more than one
incoming call distribution group, the unanswered number is counted across all corresponding incoming
call distribution groups. It is possible to return to log-in mode manually.
The Automatic Log-out feature does not work for extensions in an incoming call distribution group using
the Ring distribution method (→ 1.2.2.2 Group Call Distribution).
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming call
distribution group members. (→ 1.2.2.8 Supervisory Feature)
• Log-in/Log-out Information on SMDR
Log-in/Log-out information can be printed out on SMDR. (→ 1.25.1 Station Message Detail Recording
(SMDR))
PT Programming Manual References
None
Feature Guide References
1.19.2 Flexible Buttons
Usage
Used to log in to or out of all incoming
call distribution groups to which the
extension user belongs.
Wrap-up
Not Ready
Ready (Wrap-up mode cancel)
1.2 Receiving Group Features
Light Pattern
Red on
After Log-out
Operation
Status
Feature Guide
Off
After Log-in
Operation
61