Panasonic KX-TDA30 Features Manual page 238

1.23 Voice Mail Features
None (Default)
[Example of a) & b)]
Trunk Call
Operator
c)
Transferring to a Mailbox of the VPS
An extension user can transfer a call to a mailbox of the VPS so that the caller can leave a message
in the mailbox of the desired extension. (→ 1.11.1 Call Transfer) The extension user should use the
Voice Mail (VM) Transfer button, when transferring a call to the mailbox of the VPS. When the
extension user presses this button and enters the desired extension number, the PBX will transfer
the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without
knowing the mailbox number.
[Performance of Pressing the VM Transfer Button and Entering an Extension Number]
Switching to VM command + Recording
message command (#6 + H [H = Mailbox No.])
238 Feature Guide
Parameter
(DTMF commands are not sent. Work with default of the VPS.)
PBX
Transfer
Extn. 102
In AA Service Mode
Transmitted Command
In AA Service Mode
Sent "#6" + "102".
Switching to VM command
FWD, Intercept
VM Port 1
VM Port X
Transmitted Command
Recording message command (H [H = Mailbox
No.])
In VM Service Mode
mailbox number
VPS (In AA service mode)
VM Port 2
VM (DTMF)
Group
VM Port 3
In VM Service Mode