Ip Proprietary Telephone (Ip-Pt) Features; Ip Proprietary Telephone (Ip-Pt) - Panasonic KX-TDA30 Features Manual

1.30 IP Proprietary Telephone (IP-PT) Features

1.30.1 IP Proprietary Telephone (IP-PT)

Description
This PBX supports the connection of IP proprietary telephones (IP-PTs), which function almost identically
to normal PTs. However, they connect to the PBX over a Local Area Network (LAN), and send and receive
calls using Internet Protocol (IP).
IP-PTs have two Ethernet ports for connection, primary and secondary. They are connected to the PBX
through a network hub or other splitting device, and can have a PC connected to the secondary Ethernet
port.
This feature is only available for the KX-TDA100, KX-TDA200, and KX-TDA600.
[Connection Example]
PBX
IP-EXT
Main Office
Conditions
• Hardware Requirement: An IP-EXT card
• IP-PT registration is required through system programming before an IP-PT can be used with the PBX.
An IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-
PTs, see the Installation Manual.
• The following features cannot be used with an IP-PT:
– XDP (→ 1.10.9 Parallelled Telephone)
– Digital XDP (→ 1.10.9 Parallelled Telephone)
– OHCA (→ 1.7.4.3 Off-hook Call Announcement (OHCA))
– Walking Extension (→ 1.27.3 Walking Extension)
– Using PC Phone or PC Console on a connected PC (→ 1.31.2 PC Phone/PC Console)
Installation Manual References
KX-TDA100/KX-TDA200
2.5.8 IP-EXT16 Card (KX-TDA0470)
KX-TDA600
2.7.8 IP-EXT16 Card (KX-TDA0470)
Private IP
Network
IP-PT
Primary Secondary
Ethernet Port
Ethernet Port
1.30 IP Proprietary Telephone (IP-PT) Features
IP-PT
PC
IP-PT
Branch Office
Feature Guide 331