Panasonic KX-TDA30 Features Manual page 129

Removed Number of Digits
dialled number.
→ [352] ARS Removed Number of Digits for Carrier Access
Carrier Access Code
→ [353] ARS Carrier Access Code
Trunk Group : Assign the trunk groups which connect to each carrier.
11
→ [351] ARS Trunk Group for Carrier Access
Modify Command
[Command Explanation]
Command
Number
C
P
A
G
I
H
[Programming Example]
Carrier Table
7
8 Carrier Name
Removed Number of Digits
9
Carrier Access Code
10
Trunk Group
11
Modify Command
12
6.
Optional Assignment
Authorisation Code for a Tenant
An Authorisation code can be assigned for each carrier and each tenant.
Authorisation Code for a Trunk Group
An Authorisation code can be assigned for each trunk group and each carrier.
: Assign the number of digits to remove from the beginning of the user-
9
: Assign the code to access the carrier.
10
: Assign the commands to modify the dialled number to access the carrier.
12
Add the number.
Add the Carrier Access code.
Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
Add the Authorisation code for a tenant ( ).
Add the Authorisation code for a trunk group ( ).
Add the Itemised Billing code ( ).
Add the dialled number after the digits are removed (Home position).
1
A telecom B telecom
6 0
0077 0088
1, 2, 3 1, 2
CH#12 CH
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789 0077 6789 #12
Remove 6 digits.
9
13
1.9 Automatic Route Selection (ARS) Features
Description
2
12
H
#12 Add the number.
Add the Carrier Access
C
code ( ).
10
14
13
14
15
Feature Guide 129