Panasonic KX-TDA30 Features Manual page 334

1.31 Computer Telephony Integration (CTI) Features
PC
Conditions
[General]
• Capable telephone:
DPT: KX-T7600 series PT, USB module
IP-PT
• CTI application software must be installed on the connected PC. In addition, some features may require
a KX-TDA6920, KX-TDA0920, or KX-TDA3920 SD Memory Card for Software Upgrade to Enhanced
Version.
• Application Programming Interface (API)/Protocol
The following interfaces are required for First Party Call Control and Third Party Call Control:
First Party Call Control
Third Party Call Control
• The operating system of PC or CTI Server required for First Party Call Control or Third Party Call
Control depends on your CTI application software. For details, refer to the manual for your CTI
application software.
• For Third Party Call Control, it is possible to connect a CTI server to the Hybrid IP-PBX via either a CTI-
LINK card or USB port. However, both connections cannot be used simultaneously.
[IP-PT Call Control]
• A PC connected directly to an IP-PT cannot be used for First Party Call Control.
• IP-PTs do not support the use of PC Phone or PC Console software on a connected PC.
Installation Manual References
KX-TDA30
2.6.4 First Party Call Control CTI Connection
2.10.1 Connection of Peripherals
KX-TDA100/KX-TDA200
334 Feature Guide
PBX
LAN or USB
CTI
Interface
PC
LAN
Type
•
•
•
CTI Server
TAPI 2.1
ECMA CSTA Phase 3
TAPI 2.1
API/Protocol