Replacing Adjustable Tension Seat Upholstery - Invacare Crossfire T6, Crossfire Titanium, Crossfire All Terrain User Manual

5.5 Replacing Adjustable Tension Seat Upholstery

WARNING!
– The seat upholstery and/or cushion MUST be cleaned
regularly and/or replaced if incontinence is frequent.
The risk of pressure sores is significantly higher with
seat upholstery that is wet and/or soiled.
1. Remove the seat cushion and back upholstery from the
wheelchair.
2. Place the wheelchair onto its two rear wheels and back canes.
3. Unlatch the five adjusting straps A that secure the seat
upholstery B to the wheelchair frame C.
Remove the existing seat upholstery B.
4.
5. Place the wheelchair back onto all four wheels.
1134872-D~08
Right and left is determined by sitting in the wheelchair.
The seat upholstery B MUST be positioned with the
three rear adjusting straps A towards the rear of the
top crossbar C for proper installation.
Position new seat upholstery B onto the wheelchair frame C,
6.
ensuring the five adjusting straps A hang over the right and left
sides of the wheelchair.
7. Pull the front adjuster straps A around and under the wheelchair
frame top bars C.
Slip front adjuster strap A through corresponding anchor loop
8.
D and adjust the seat upholstery A to desired tension. Secure
the adjustment straps.
9. Place the wheelchair onto its two rear wheels and back cane.
10. Securely latch the four remaining adjuster straps A together.
11. Return wheelchair to upright position.
12. Reinstall the seat cushion and back upholstery.
Service
63