28
Points 4 and 5 depend on the cooker type
4. Put the small clips on the left and right hand sides
of the lower panel (Fig. F).
5. Position the large clips over the small clips, align
them and screw them in place (Fig. F).
or
4. Replace the small clips back onto the bottom glass
panel (Fig. F).
5. Fit the large clips and screw them in (Fig. F).
6. Insert the upper panel. The smooth surface must
face outwards.
7. Replace the cover and screw it back on.
8. Refit the oven door.
The oven must not be used again until the panels
have been correctly fitted.