Nortel i2022 Series User Manual page 38

3–Way Conferencing
NOTE: On the Nortel DMS-100
Lucent Technologies 5ESS
Conferencing Two Outgoing Calls
1. Place the first call.
2. Press the Conf or the Conf/Tr softkey, the phone automatically provides dial tone from another Call Appearance.
This display is shown after the second call is ringing.
3. Dial the number of the second party.
4. Press the Join key to complete the conference.
NOTE: You may press the Join key after the second party answers or while it is ringing.
The Conf key will always change to AdNext. If you only subscribe to 3-Way Conferencing, you cannot add any more to
the conference.
NOTE: When you attempt to join a 4
Conferencing an Incoming Call to an Outgoing Call
1. Answer the incoming call.
2. Press Conf and proceed as explained above.
i2022 ISDN Teleset
® ®
and Siemens EWSD switches, the Conf key is displayed as Conf/Tr. On the
®
switch it is displayed as Conf and Trans keys.
th
party, you will receive a "Service Option Violated" message.
36