Table of Contents
Advertisement
Answering calls
Depending on the system hardware/
software configuration, Call Display
information (CLID) for incoming exter-
nal calls will appear on the display.
Your system administrator must
enable the CLID feature for your
handset in system programming.
To answer a call:
• Press
your handset rings.
• If you are using headset, press any
key on the handset to answer the
call.
To stop the handset ringing without
answering the call:
• Press
muted. The display shows:
»RINGER MUTED«
• Alternatively, press one of the
volume control buttons to mute the
ringing signal.
Hold a call
1 While on a call, press R (
2 To retrieve the held call, press R
(
) again.
to answer a call when
and the ring signal is
24
).
Advertisement
Table of Contents
