Connect To External Digital Transmitter - BenQ LU9715 User Manual

Connect to external digital transmitter

The projector features a built-in HDBaseT for you to work with optional digital transmitter
to send video, RS-232, LAN signal to projector with single RJ-45 cable. If the optional digital
transmitter supports IR remote controller I/O, you may also send IR remote controller signal to
LU9715 projector using the same RJ-45 cable.
Control PC
Control PC
Caution:
• The HDBaseT of your projector supports to video, RS-232, remote controller, and network control signal
receiving but not Power over Ethernet (PoE) transmission and receiving.
• Effective transmission distance of your digital transmitter is 100 meters. Transmission over 100 meters may lead
to projection screen interruption, interference, or control signal failure.
• Please use Cat.5e RJ-45 cable or better and prevent the cable from becoming twisted. Otherwise the cable may
be damaged and signal transmission quality poor, reducing transmission distance and image quality.
30
DVD Player
VGA Cable
VGA IN YPbPr
Hub
RJ-45 Cat5e or above
DVD Player
Digital Transmitter
RJ45 HDMI RS232
Lan
RS-232c
RJ45
HDBaseT
Projector