Choosing A Location - BenQ LU9715 User Manual

Choosing a location

Your projector is designed to be installed in one of four possible installation locations. Your
room layout or personal preference will dictate which installation location you select. Take into
consideration the size and position of your screen, the location of a suitable power outlet, as well
as the location and distance between the projector and the rest of your equipment.
1. Front Table:
Select this location with the projector
placed near the floor in front of the
screen. This is the most common way to
position the projector for quick setup and
portability.
2. Front Ceiling:
Select this location with the projector
suspended from the ceiling in front of
the screen. Purchase the BenQ Projector
Ceiling Mount Kit from your dealer to
mount your projector on the ceiling.
*Set Ceiling Front after you turn the projector on.
* To set the projector position:
Press MENU and then press ◄/► to select Setup menu.
Press ▲/▼ to highlight Projector Installation and press ◄/► until the correct position is selected.
Note:
• Ceiling installation must be done by a qualified professional. Contact your dealer for more information. It is not
recommended you install the projector by yourself.
• Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is dropped.
• Do not use the projector in an environment where extreme temperature occurs. The projector must be used
at temperatures between 41 degrees Fahrenheit (5 degrees Celsius) and 104 degrees Fahrenheit (40 degrees
Celsius).
• Screen damage will occur if the projector is exposed to moisture, dust or smoke.
• Do not cover the vents on the projector. Proper ventilation is required to dissipate heat. Damage to the
projector will occur if the vents are covered
3. Rear Table:
Select this location with the projector
placed near the floor behind the screen.
Note that a special rear projection screen
is required.
*Set Rear Table after you turn the projector on.
70cm
4. Rear Ceiling:
Select this location with the projector
suspended from the ceiling behind the
screen.
Note that a special rear projection screen
and the BenQ Projector Ceiling Mount Kit
are required for this installation location.
*Set Ceiling Rear after you turn the projector on.
70cm
23