Io Panel - BenQ LU9715 User Manual

Hide thumbs Also See for LU9715:

Table of Contents

IO panel

• HDBaseT/LAN

For connection to RJ45 Cat5/Cat6 Enthernet cable to input uncompressed high-definition video

(HD), control signals.

• 3D Sync Out

Connection to 3D IR sync signal transmitter.

• DVI-D

Connection to DVI-D source.

• HDMI

Connection to HDMI source.

• DisplayPort

Connection to device or PC featuring DisplayPort.

• 3G-SDI

Connection to 3G-SDI source.

• Computer 1

15-pin VGA port for connection to RGB, component HD source, or PC.

• Computer 2 (V, H, B/Pb, G/Y, R/Pr)

Connection to RGB or YPbPr/YCbCr output signal with BNC type input terminal.

• Monitor Out

Connection to other display equipment for concurrent playback display.

• RS-232

Standard 9-pin D-sub interface for connection to PC control system and projector maintenance.

• TRIGGER

3.5mm mini earphone jack, employs 350mA display relay to provide 12(+/-1.5)V output and

short circuit protection.

• Wired Remote

Connection to input Niles or Xantech compatible IR repeater system.

Caution

Make sure the port is valid before inserting a wired remote controller. The remote controller may be damaged in

case of an invalid port, e.g. a wired remote controller is connected to trigger output.

Table of Contents