4. 16:9: Scales an image so that it is displayed
in the center of the screen with a 16:9
aspect ratio. This is most suitable for images
which are already in a 16:9 aspect, like high
definition TV, as it displays them without
aspect alteration.
16:9 picture
2D Keystone
•
Press ENTER and press ▲/▼/◄/► to adjust horizontal or vertical distortion brought by the
projection angle.
•
Corner Fit
Press ENTER to enter the Corner Fit menu. See
details.
Position
•
Press ENTER and press ▲/▼/◄/► to adjust the position of the projectored picture.
•
Phase
Press ◄/► to adjust Phase for the projectored picture.
H. Size
•
Press ◄/► to adjust H. Size for the projectored picture.
•
Digital Zoom
Press ◄/► to enlarge the projected image.
Digital Shrink & Shift
•
Press ENTER to enter the Digital Shrink & Shift menu. See
on page 44
for more details.
•
Blanking
Press ENTER to enter the Blanking menu. See
details.
Overscan
•
Press ◄/► to hide edge of the projected image to damage the noise appear.
•
3D
Press ENTER to enter the 3D menu. See
5. 16:10: Scales an image so that it is displayed
in the center of the screen with a 16:10
aspect ratio. This is most suitable for images
which are already in a 16:10 aspect, as it
displays them without aspect alteration.
16:10 picture
"Corner Fit menu" on page 44
"Digital Shrink & Shift menu"
"Blanking menu" on page 45
"3D menu" on page 45
for more
for more
for more details.
43