Osd Menu - Display - BenQ LU9715 User Manual

Gain: Press ENTER to enter the Gain menu. Press ◄► to adjust settings of red, green, blue,
cyan, magenta, and yellow.
White Balance: Press ENTER to enter the White Gain menu. Press ◄► to adjust settings of
red, green, and blue.
• Sharpness
Press ENTER, and use ◄► to adjust the sharpness, which changes the high-frequency details.
• Noise Reduction
Press ◄► arrow key to adjust noise of projection image. This function helps eliminating image
noise caused by interlaced scanning input. In general, image noise reduction decreases value of
high frequency details and makes the image looking smoother.
• Overscan
Input source may be not an image with 16:10 ratio and there may be noise at image margin.
Select one of the three options to hide image margin.

OSD menu - Display

• Source
This functions is the same as the Hotkey on your remote controller. You can select the desired
input source with the remote controller or this function.
HDMI
This is the terminal to input HDMI signals from PC or media device.
DVI-D
This is the terminal to input DVI-D signals from PC.
Computer 1
This is the terminal to input RGB signals from PC.
Computer 2
This is the terminal to input YCbCr/YPbPr or RGB singals(RGBHV) from PC or media device.
DisplayPort
This is the terminal to input DisplayPort signal from PC or media device.
3G-SDI
47