Osd Menu - Advanced - BenQ LU9715 User Manual

Hide thumbs Also See for LU9715:

Table of Contents

When the temperature rises, the cooling fan speeds up, accompanying (higher louder noise)

to exhaust the internal heat out of the projector ensuring its normal operation. However, the

projector may turn off automatically if it is used in an environment with at excessively high

temperature or in an area at a high altitude. In this case, you can enable this function by setting it

to ON and have the cooling fan speed up to control the internal temperature of the projector.

Note:

An area is considered high altitude when it is above 5000 feet.

• Test Pattern

The projector features a set of test patterns for installation and adjustment. Select the test

pattern function in OSD or press the TEST PATTERN button on your remote controller to

display the first test pattern, press again to display the next one. Repeat to scroll through

available test pattern or press the Exit button to exit.

• Reset Setup

Press "Yes" to reset all settings to default in Setup OSD.

OSD menu - Advanced

• Blanking

Select the edge you would like to blank (Top, Bottom, Left, and Right).

• Edge Blending

This function enables you to display multiple projection images in on the same screen

simultaneously, using edge blending function to uniform images. To enable this function, please

set status to "on".

Status: Select on to enable edge blending.

Table of Contents