BenQ LU9715 User Manual page 57

Press ▲▼ arrow keys and Enter key to select network and its settings:
IP Address: To specify an IP address, press the Enter button to show the IP address input
window. Use the ◄► buttons to select the number in the address to be changed. Use the ▲▼
buttons to increase or decrease the number in the IP address.
Subnet Mask: Set up IP address of subnet.
Gateway: Set up IP address of gateway.
DHCP: Set DHCP to On or Off. If this is set to On, the DHCP server of the network domain
assigns an IP address to the projector. That is, the IP address is displayed in the address window
instead of being entered manually. Otherwise, the domain does not or cannot assign an IP
address, and 0. 0. 0. 0 is shown on the IP address window.
Apply: Select this button and press Enter. It takes several seconds to execute the change in
network settings till the following message disappears.
For further information on network control connections and settings, please refer to the
Remote control manual.
• Background
This function can be used to select pictures or color displayed on the blank screen. The
background colors that you can select include logo, blue, black and white.
• Startup Logo
Press ◄► arrow keys to enable /disable the startup logo function.
• Trigger
The projector features one trigger output. If the projector comes with an auto screen device,
you can connect it to the trigger to open the screen when the projector powers up. This
function may have a 2-3 second lag before powering up.
• Dynamic Black
This function allows the projector to automatically adjust the contrast of the image during the
57