Figure 3-14. Port Configuration Screen (2 Of 2) - Bay Networks BayStack 350 Using Manual

Port Trunk
---- -----
15
16
17 1
18
19 3
20 3
21
22 4
23 4
24
25 1
26 1
27
28
All
Press Ctrl-P to display choices for ports 1-14.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-14. Port Configuration Screen (2 of 2)
Note: When a gigabit MDA is installed, only the Status field for that MDA
port is configurable. See
page 3-32
gigabit MDA only supports 1000 Mb/s in full-duplex mode.
Table 3-12
Table 3-12. Port Configuration Screen Fields
Field
Port
304376-B Rev 00
Port Configuration
Status Link
------------ ----
[ Enabled ] Up
[ Enabled ] Down
[ Enabled ] Up
[ Enabled ] Down
[ Enabled ] Up
[ Enabled ] UP
[ Enabled ] Down
[ Enabled ] Up
[ Enabled ] Up
[ Enabled ] Down
[ Enabled ] Up
[ Enabled ] Up
[ Enabled ] Down
[ Enabled ] Down
[ Enabled ]
"High Speed Flow Control
to set the autonegotiation field for the gigabit MDA port. The
describes the Port Configuration screen fields.
Description
Indicates the switch port numbers that correspond to the field settings in that row of
the screen (for example, the field settings in row 2 apply to switch port 2). Note that
the settings applied in the All row (bottom row) affect all switch ports (except the
gigabit MDA port, when installed).
Auto Negotiation
----------------
[ Enabled ]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Enabled ]
[ Enabled ]
[ Enabled ]
[ Enabled ]
[ Enabled ]
[ Disabled ]
[ Disabled ]
[ Disabled ]
Press Ctrl-C to return to Main Menu.
Configuration" on
Using the Console Interface
Speed Duplex
-----------------
[ 100Mbs / Full ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Full ]
[ 100Mbs / Full ]
[ 100Mbs / Full ]
[ 100Mbs / Full ]
[ 100Mbs / Full ]
[ 10Mbs / Full ]
[ 10Mbs / Full ]
[ 10Mbs / Full ]
(continued)
3-31