Table of Contents
Advertisement
Trunk Configuration Screen for Switch S3
As shown in
configuration (T4). This trunk connects directly to switch S1.
As in the previous screen examples, to set up an inter-switch trunk configuration
choose MultiLink Trunk Configuration from the MultiLink Trunk Configuration
Menu screen.
Figure 1-37
Trunk
Trunk Members
----- ----------------------------
1
[
1
][
3
2
[
][
3
[
][
4
[
][
5
[
][
6
[
][
Trunk
Trunk Name
----- ------------------
1
[ S3:T4 to S1 ]
2
[ Trunk #2 ]
3
[ Trunk #3 ]
4
[ Trunk #4 ]
5
[ Trunk #5 ]
6
[ Trunk #6 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-37.
MultiLink Trunk Configuration Screen for Switch S3
The MultiLink Trunk Configuration screen for switch S3 is configured as follows:
•
•
304376-B Rev 00
Figure 1-33
shows the MultiLink Trunk Configuration screen for switch S3.
MultiLink Trunk Configuration
][
][
]
][
][
]
][
][
]
][
][
]
][
][
]
][
][
]
Trunk (read only) indicates the trunks (1 to 6) that correspond to the switch
ports specified in the Trunk Members fields.
Trunk Members indicates the ports that can be configured, in each row, to
create the corresponding trunk:
Ports 1 and 3 are assigned as trunk members of trunk 1.
BayStack 350 10/100/1000 Series Switches
on
page
1-45, switch S3 is set up with one trunk
STP Learning
------------
---------------
[ Normal
]
[ Normal
]
[ Normal
]
[ Normal
]
[ Normal
]
[ Normal
]
Press Ctrl-C to return to Main Menu.
Trunk Mode
Trunk Status
------------
Basic
[ Enabled
Basic
[ Disabled ]
Basic
[ Disabled ]
Basic
[ Disabled ]
Basic
[ Disabled ]
Basic
[ Disabled ]
]
1-51
Hide quick links:
Advertisement
Chapters
Table of Contents
