Main Menu - Bay Networks BayStack 350 Using Manual

Using the BayStack 350 10/100/1000 Series Switch

Main Menu

This section describes the options available from the CI main menu
The CI screens and submenus for these options are described in the following
sections.
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Figure 3-2. Console Interface Main Menu
Table 3-1
Table 3-1. Console Interface Main Menu Options
Option
IP Configuration/Setup
SNMP Configuration
3-4
BayStack 350-24T Main Menu
IP Configuration/Setup...
SN MP Configuration...
System Characteristics...
S witch Configuration...
C onsole/Comm Port Configuration...
S panning Tree Configuration...
TELNET Configuration...
So ftware Download...
Display Event Log
Reset
Reset to Default Settings
Logout
describes the CI main menu options.
Description
Displays the IP Configuration/Setup screen (see
page 3-7). This screen allows you to set or modify IP configuration parameters.
Displays the SNMP Configuration screen (see
page 3-12). This screen allows you to set or modify the SNMP read-only
community and read-write community strings, enable or disable the
authentication trap, set the IP address of trap receivers, and set the trap
community strings.
(Figure
"IP Configuration/Setup" on
"SNMP Configuration" on
(continued)
304376-B Rev 00
3-2).