Bay Networks BayStack 350 Using Manual page 149

Trunk Trunk Members
----- ----------------------------
1 [ 6 ][ 7
2 [ 25 ][ 26
3 [ 13 ][ 14
4 [ 19 ][ 20
5 [ 22 ][ 23
6 [ ][
Trunk Trunk Name
----- -------------------
1 [ S1:T1 to FS2 ]
2 [ S1:T2 to S2 ]
3 [ S1:T3 to S2 ]
4 [ S1:T4 to S3 ]
5 [ S1:T5 to S4 ]
6 [ Trunk #6 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-17. MultiLink Trunk Configuration Screen
Table 3-15
Table 3-15. MultiLink Trunk Configuration Screen Fields
Field Description
Trunk Column header for the read-only fields in this screen. The read-only data displayed in the
Trunk column indicates the trunk (1 to 6) that corresponds to the switch ports specified in
the user-configurable Trunk Members fields.
Trunk Members The Trunk Members column contains fields in each row that can be configured to create
the corresponding trunk. Each switch port can only be a member of a single trunk. The
appropriate trunk number for each trunk member configured within this field is shown
adjacent to the corresponding switch port in the following screens: Port Configuration
screen, and Spanning Tree Configuration screen. Gigabit ports cannot be configured as
trunk members.
Default Value:
Range:
304376-B Rev 00
MultiLink Trunk Configuration
][ 9 ][ 17 ]
][ ][ ]
][ ][ ]
][ ][ ]
][ ][ ]
][ ][ ]
describes the MultiLink Trunk Configuration screen fields.
blank field
1 to 28 (depending on model type)
STP Learning Trunk Mode
------------ ---------------
[ Normal ]
[ Normal ]
[ Normal ]
[ Normal ]
[ Fast ]
[ Disabled ]
Press Ctrl-C to return to Main Menu.
Using the Console Interface
Trunk Status
------------
Basic [ Enabled
Basic [ Enabled
Basic [ Enabled
Basic [ Enabled
Basic [ Enabled
Basic [ Disabled ]
(continued)
]
]
]
]
]
3-37