Bay Networks BayStack 350 Using Manual page 237

Table E-1. Factory Default Settings for the BayStack 350 Switch (continued)
Field
Autonegotiation
Flow Control
Note: The following two fields only appear when a single Phy MDA with a separate redundant Phy port is
installed.
Preferred Phy
Active Phy
Trunk Members
STP
Trunk Mode
Trunk Status
Trunk Name
Traffic Type
Monitoring Mode
Monitor Port
Port X
Port Y
Address A
Address B
Packet Type
Limit
VLAN
Snooping
Proxy
Robust Value
304376-B Rev 00
Default setting
Enabled
Disabled
Right
Read-only field indicating the
operational Phy port (Right,
Left, or None)
blank field
Normal
Basic
Enabled
Trunk #1 to Trunk #6
Rx and Tx
Disabled
Zero-length string
Zero-length string
Zero-length string
00-00-00-00-00-00
(no MAC address assigned)
00-00-00-00-00-00
(no MAC address assigned)
Both
None
1
Enabled
Enabled
2
Appears in this CI screen
High Speed Flow Control Configuration
(page 3-32)
MultiLink Trunk Configuration
(page 3-36)
MultiLink Trunk Utilization (page 3-39)
Port Mirroring Configuration
(page 3-41)
Rate Limiting Configuration
(page 3-45)
IGMP Configuration (page 3-48)
Default Settings
(continued)
E-3