Initial Setup Of The Baystack 350 Switch; Figure 2-11. Bay Networks Logo Screen - Bay Networks BayStack 350 Using Manual

Using the BayStack 350 10/100/1000 Series Switch
***********************************************
* Bay Networks,Inc.
* Copyright (c) 1996,1998,1999
* All Rights Reserved
* BayStack 350- XX T
* Versions: HW:Rev x
***********************************************
Enter Ctrl-Y to begin.
Figure 2-11. Bay Networks Logo Screen
Note: The Bay Networks logo screen for your switch will display the correct
model number and the current hardware, firmware, and software versions.
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 350 Main Menu, press [Ctrl]-Y.

Initial Setup of the BayStack 350 Switch

In most cases the BayStack 350 switch can be installed and made operational
using the system default settings (see Appendix E, "Default Settings" for a list of
default setting for the BayStack 350 switch).
2-16
FW:V x . xx SW:V x . x.x.x
*
*
*
*
*
304376-B Rev 00