Set-Up; Unpacking; Compressor Initial Setup Checklist - Invacare HomeFill II IOH200AW User Manual

3 Set-Up

3.1 Unpacking

1145804-E
PART NUMBER
1116440
1102315
1105177
1131308
1145804
1. Check for any obvious damage to the carton or its contents. If
damage is evident, notify the carrier, or your local dealer.
2. Remove all loose packing from the carton.
3. Carefully remove all of the components from the carton.
Unless the compressor is to be used IMMEDIATELY, leave
the compressor in its packaging for storage until use of the
compressor is required.

3.2 Compressor Initial Setup Checklist

Dealers ONLY — Refer to 2.3 Dealer Information, page 11
before performing this procedure.
Users ONLY — Contact your Invacare dealer or Invacare
for assistance with the setup procedure and to report
unexpected operation or events.
Before operating the HomeFill II Compressor for the first time,
complete the following checklist:
q
Choose a location for the compressor.
q
Transport the compressor to the desired location.
q
Connect the power cord to the compressor.
q
Connect the compressor to the concentrator.
Set-Up
DESCRIPTION
Compressor Assembly
Packaging Assembly
Supply Line Assembly
Power Cord
User Manual (not shown)
13