Download Print this page

Invacare HomeFill II IOH200AW User Manual page 7

Compressor
Hide thumbs Also See for HomeFill II IOH200AW:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
WARNING!
– NEVER block the air openings of the product or place
it on a soft surface, such as a bed or couch, where the
air opening may be blocked. Keep the openings free
from lint, hair and the like.
– DO NOT use outdoors. Indoor use only.
– NEVER use near any type of flame or
flammable/explosive substances, vapors or
atmosphere.
– DO NOT disassemble. No modification of this
equipment is allowed. The unit is provided with
double insulation and has no internal user serviceable
parts. If any service is required, contact Invacare
Technical Service.
– If the compressor has a damaged cord or plug, if it
is not working properly, if it has been dropped or
damaged, or submersed in water, call a qualified
technician for examination if repair is needed.
– If any leakage of the oxygen cylinder is detected DO
NOT attempt to use the cylinder. Turn the flow
selector knob on the regulator to "Off". If leakage
persists, place the cylinder outdoors and notify your
Home Health Care Provider or Service Representative
of this condition.
– Children should ALWAYS be supervised around the
HomeFill II unit. When used with the HomeFill table
or similar elevated support surfaces, a child could pull
over any such table causing the unit to fall. Failure
to observe this warning may result in personal injury
or product damage.
1145804-E
WARNING!
– DO NOT allow oil from your hands or other sources
to come into contact with the compressor coupling
or cylinder fittings. These substances may become
flammable in the presence of oxygen and cause injury.
Avoid touching the cylinder fitting whenever possible.
Example of items to avoid are hand creams or lotions,
cooking oils, suntan oils or sunblocks and similar oily
products. If you use these types of products Invacare
suggests you wash your hands prior to using the
HomeFill unit. If the cylinder fitting should come in
contact with such substances it should be cleaned
off with a damp cloth prior to connecting it to the
compressor.
– NEVER oil or lubricate the compressor coupler or
cylinder fittings. NEVER use any penetrating oil
or lubricant such as WD-40® or 3-in-1 Oil®. If
connection difficulty is experienced verify that the
cylinder fitting is being inserted straight down into
the compressor coupler. If continued difficulty is
experienced contact your supplier for assistance.
– Keep the oxygen tubing, cord, and unit away from
heated or hot surfaces, including space heaters,
blankets, stoves and similar electrical appliances.
Safety
7

Advertisement

loading