Figure 8 Removing The Contivity 4500 Front Bezel - Nortel 2500 Installation Hardware

32 Chapter 2 Contivity 4500 Option Installation
1
Insert a flat-head screwdriver into the slots on the lower left and right sides of
the chassis, and pry the bezel forward.
2
Slide your fingers between the front bezel and the switch.
3
Pull the bezel forward firmly, separating the ball studs on the bezel from the
sockets on the chassis.
Figure 8
need to turn off the switch to remove the front bezel.

Figure 8 Removing the Contivity 4500 front bezel

Using a screwdriver
seperate ball stud
on bezel from socket
on chassis (4 corners)
302283-E Rev 00
shows you how to remove the front bezel from the switch. You do not