Figure 6 Removing A Contivity 4600 Power Supply - Nortel 2500 Installation Hardware

26 Chapter 1 Contivity 4600 Option Installation

Figure 6 Removing a Contivity 4600 power supply

3
Grab the handle and pull the power supply firmly, until the device disengages.
Be careful of the sharp sheet-metal edges.
4 Insert the new power supply. Make sure it seats firmly in its socket and is
locked in. Be sure the green power LED on the front of the power supply is
on.
5 Secure the power supply screws tightly with a screwdriver.
6
Replace the front bezel.
302283-E Rev 00
CS460010A