Figure 4-6 Coma Cell In The Cleanup Branch Of A Start Cell - Nortel VT100 Development Manual

4-10 IVR 2.0/I call flow interface
555-9001-316 Standard 1.0 February 1996
Table 4-1
Branches of the COMO cell (continued)
Branch
MORE DATA
For each COMO cell, use either the "END OF DATA" branch, or the "MORE
DATA" branch, but not both. If you use the "MORE DATA" branch, the next
cell must be another COMO cell. The last COMO cell should use the "END
OF DATA" branch.
Setting the COMA cell parameters
Use a COMA cell in the CLEANUP branch of the START cell to deal with
an error like a caller hanging up in the middle of a transaction. See Figure 4-6.
If you selected manual mode in the application template, use the COMA cell
to abort a transaction in progress and release the session (see Chapter 2).
Figure 4-6
COMA cell in the CLEANUP branch of a START cell
The COMA cell frees all memory and buffers associated with the COMI and
COMO cells.
The COMA cell parameters window contains a cell name field, and a
comments field. The COMA cell in Figure 4-6 has "Clear transaction" as its
cell name.
Reason the branch would be taken
The transaction requires additional output buffers