Table of Contents
Advertisement
Figure 3-3
trs.conf file syntax
app-name:board-number>session-number:initial-template:heartbeat:protocol
The colons (:) and the greater than (>) symbols are used as field delimiters
and must be placed in the specified positions without any additional white
space.
app-name
The app-name entry identifies the application on the mainframe to which you
assign the session. The name entered here is the same name you enter in the
action templates that are executed by the IVR 2.0/I application.
board-number
The board-number entry must be 0. This entry is provided to support future
development.
session-number
In the VT100 option, the session-number entry determines the number of
sessions per board with session numbers ranging from 2 to 16. By using two
digital boards there can be up to 15 sessions, if there is only one ACCESS
link.
Meridian IVR VT100 Gateway Development Guide Product release 2.0/I
Getting started 3-5
Advertisement
Table of Contents
