Installing The Secure Router 4134 Chassis And Hardware Components; Unpacking And Inspecting The Secure Router 4134 Chassis - Nortel Secure Router 4134 Quick Start Manual

.
Installing the Secure Router 4134
chassis and hardware components
For detailed instructions about how to install the Secure Router 4134 and
its hardware components, see Nortel Secure Router 4134 Installation —
Chassis (NN47263-300) and Nortel Secure Router 4134 Installation —
Hardware Components (NN47263-301).
The Secure Router 4134 ships with the fan tray installed, as well as the
power supply unit or units that you ordered. If you must replace a fan tray
or power supply unit, or if you choose to install a second power supply
unit, see Nortel Secure Router 4134 Installation — Hardware Components
(NN47263-301).

Unpacking and inspecting the Secure Router 4134 chassis

Use the information in this section to verify you have received all
accessories that ship with the Secure Router 4134.
Procedure steps
Step
1
2
3
ATTENTION
If you detect any damage, do not install the chassis. Call the Nortel Technical
Solutions Center in your area.
The following table lists the accessories you can find in the shipping
container with the Secure Router 4134. Place a mark in the third column of
the table to verify that you have received each accessory.
Copyright © 2007, 2008 Nortel Networks
.
Action
Remove the shipping container.
Place the chassis on antistatic material.
Check all items for damage.
Nortel Secure Router 4134
Quick Start
NN47263-100 02.01 Standard
18 February 2008
--End--
29