Figure 3 Attaching The Cage Nuts To The Rack; Figure 4 Installing The Shelf In The Equipment Rack - Nortel VPN Router 2750 Installation Manual

Figure 3 Attaching the cage nuts to the rack

2
3

Figure 4 Installing the shelf in the equipment rack

4
5
Chapter 1 Installing the Nortel VPN Router 2750 chassis 31
Rail
without
threaded
holes
Cage nut
CS260003A
Position the rack-mount shelf inside the rack as shown in
Align the holes in the shelf with holes in the front of the rack.
Rack edge
Flange
Snap the support flange into place
above the flange fits into the appropriate hole.
Insert one of the supplied panhead screws through the top hole on each side of
the shelf into the hole in the rack, and tighten the screws
(Figure 4). Ensure that the alignment pin
Nortel VPN Router Installation — VPN Router 2750
Figure 4.
CS260003A
(Figure 4).