1000Base-T (1000 Gt) Ethernet Interface Card - Nortel VPN Router 2750 Installation Manual

Nortel networks vpn router installation guide
Hide thumbs Also See for Nortel VPN Router 2750:
Table of Contents

Advertisement

1000BASE-T (1000 GT) Ethernet interface card

The 1000BASE-T (1000 GT) Ethernet card replaces the 10/100BASE-TX
Ethernet card (see the previous section). This card provides 10/100/1000 Mbit/s
Ethernet services and supports autonegotiation. The card supports the IEEE
802.3ab standard and provides RJ-45/CAT 5 interconnection. It can operate in
either full or half duplex mode at 10/100 Mbit/s, and in full duplex mode at 1
Gbit/s. At 1 Gbit/s, autonegotiation must be used.
The 1000BASE-T (1000 GT) Ethernet card supports 10/100/1000 Mbit/s
operation in the VPN Router 2700/2750.
For the 1000BASE-T (1000 GT) Ethernet interface card to be recognized by the
system, the minimum required VPN Router operating software is:
5.05.330
6.05.140 and all subsequent versions
7.00.062
7.05.100 and all subsequent versions (FIPS branch)
7.05.300 and all subsequent versions
The 1000 GT card does not replace the high-performance 1000BASE-T 1000 MT
card (see the following section).
The following figure shows the 1000BASE-T (1000 GT) Ethernet interface
full-height card for VPN Router.
Appendix A Technical specifications 85
Nortel VPN Router Installation — VPN Router 2750

Advertisement

Table of Contents
loading

Table of Contents