Connecting The Power Cord; Figure 7 Rear View Of The Nortel Vpn Router 2750 - Nortel VPN Router 2750 Installation Manual

Figure 7
power cord attach to the rear of the gateway.

Figure 7 Rear view of the Nortel VPN Router 2750

VPN Router 2750
Connect the interface cables to the VPN Router 2750 in this order:
1
2
3

Connecting the power cord

You must order the power cord for the VPN Router 2750 separately.
Chapter 2 Cabling the VPN Router and turning the power on 37
shows the back of the VPN Router 2750. All interface cables and the
100 - 240 V~
5 - 3 A
60 - 50 Hz Power
AC Power
receptacle switch
Connect the 10/100BASE-X RJ-45 cables to the built-in 10/100BASE-X
Ethernet LAN ports on the gateway
Connect the serial cable shipped with the VPN Router 2750 to the serial port
(Figure 7), if you plan to connect a terminal or PC to the gateway.
Connect all other cables to the ports on the installed interface cards.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
Caution: Risk of equipment damage
Do not modify or use the AC power cord if it is not the exact type that is
required for your power outlet.
LAN0 LAN1
Serial Port
Serial port 10/100
Ethernet
LAN ports
(Figure 7).
Nortel VPN Router Installation — VPN Router 2750
4 PCI slots
1 2 3 4
11424EA