Table of Contents
Advertisement
Figure 21 Removing the top cover
3
Slide the top cover forward approximately 1/4 inch.
4
Lift the lid 2 or 3 inches, and pull it off the chassis.
The VPN Router 2750 system board is now exposed.
location of the option card and DIMM slots on the system board.
Chapter 4 Installing option cards and DIMMs 65
Remove these 4 screws
Alert
Boot/Ready
Slide cover forward and lift up
Nortel VPN Router Installation — VPN Router 2750
CS260006A
Figure 22
shows the
Advertisement
Table of Contents
