10/100Base-Tx Ethernet Interface Card; Figure 32 10/100Base-Tx Ethernet Interface Card - Nortel VPN Router 2750 Installation Manual

Nortel networks vpn router installation guide

Hide thumbs Also See for Nortel VPN Router 2750:

Table of Contents

84 Appendix A Technical specifications

The SSL VPN Module 1000 is supported on VPN Router 5000, 2750, 2700, and

1750 gateways running VPN Router Version 5.0 software. You must install the

SSL VPN Module 1000 in slot 1 of the VPN Router 5000, 2750, 2700, or 1750.

The VPN Router gateway distinguishes between the services that it provides and

the services that the SSL VPN Module 1000 provides and immediately forwards

the appropriate traffic to the SSL VPN module.

10/100BASE-TX Ethernet interface card

The 10/100BASE-TX Ethernet interface card has a single RJ-45 connector that

provides the signals needed to interface to 10BASE-T and 100BASE-TX Ethernet

equipment.

Figure 32

For information about the cables that you can connect to this interface and the

cable pinouts, see

NN46110-318 02.01

Note: For complete information about the SSL VPN Module 1000 and

instructions for configuring it, see Nortel VPN Router Configuration —

SSL VPN Services (NN46110-501).

shows the 10/100BASE-TX Ethernet interface card.

"10/100BASE-TX Ethernet LAN ports" on page

CS260009A

78.

Table of Contents