Connecting The Bsg8Ew/12Ew/Aw/Tw To The Lan; Connecting Lan Devices To The Bsg8Ew/12Ew/Aw/Tw - Nortel BSG12aw Installation Manual

4 Connect the T1 connection. The PSTN provider brings the adapter box
(RJ48<->RJ45) at the SMB premises to expose native RJ45 type connectors
and connect to the BSG12tw WAN.
Refer to the documentation for your WAN edge device for proper setup and
configuration of the device.

Connecting the BSG8ew/12ew/aw/tw to the LAN

Use this procedure to connect the BSG8ew/12ew/aw/tw to the LAN.
Prerequisites
• Connect power to the BSG8ew/12ew/aw/tw.
• Obtain a standard Ethernet cable.
Procedure steps
Step Action
1 Plug one end of a standard Ethernet cable into a LAN port on the front of your
BSG8ew/12ew/aw/tw.
2 Plug the other end of the Ethernet cable into your LAN.

Connecting LAN devices to the BSG8ew/12ew/aw/tw

Use this procedure to connect LAN devices to the BSG8ew/12ew/aw/tw.
Prerequisites
• Connect power to the BSG8ew/12ew/aw/tw.
• Obtain one standard Ethernet cable for each LAN device.
Procedure steps
Step Action
1 Plug one end of a standard Ethernet cable into one of the LAN ports on the front
of your BSG8ew/12ew/aw/tw.
2 Plug the other end of the ethernet cable into your LAN device.
3 Repeat steps 1 and 2 for each additional LAN device you want to connect to the
BSG8ew/12ew/aw/tw.
End
End
End
Cable connection 47
Installation