Bsg12Ew/Aw/Tw Link Activity And Poe Leds - Nortel BSG12aw Installation Manual

The following table shows the status of link activity for the BSG8ew WAN port LED:
Link/Act LED Status
Green On
Green Flashing
Green Off
Amber On
Amber Flashing
Amber Off
Both WAN/ Off
LAN port LEDs

BSG12ew/aw/tw link activity and PoE LEDs

Each LAN port on the BSG12ew/aw/tw has one LED that indicates link activity and one PoE
LED. The link activity LED turns on when an Ethernet cable is connected to the corresponding
port. The PoE LED indicates whether PoE is enabled. For more information, see
tw link activity LEDs" on page
table.
BSG12ew/aw/tw link activity LEDs
Link activity LEDs
Description
The WAN/LAN port is Link Up at 100 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
The WAN/LAN port is Link Up at 10/10 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
No connection.
27, "BSG12ew/aw/tw POE LEDs" on page
LED functionality 27
"BSG12ew/aw/
28, and the following
Installation