Wall-Mount Bracket Kit - Nortel BSG12aw Installation Manual

If more than one BSG8ew/12ew/aw/tw unit is mounted on top of other units, only the unit lowest
from bottom should have WiFi activated to prevent radio interference. The stacked antennas may
have to be laterally adjusted.

Wall-mount bracket kit

Only the BSG8ew unit can be mounted on a wall.
To mount a BSG8ew on the wall, you need a wall-mount bracket and a BSG8ew wall-mount kit.
(The wall-mount kit contains a BSG8ew-specific door, antenna adapter, and power supply holder.)
ou attach the wall-mount bracket to the wall, and then you install the unit in the wall-mount
Y
bracket. If your system includes additional units (BCM50, BES50, or BSG8ew), you need a
wall-mount bracket for each unit.
Each wall-mount bracket includes a cable-management tray to store and organize the cables
connected to the BSG8ew. To position the antenna against the unit, an antenna adapter is also
included. For more information, see
BSG8ew in a wall-mount bracket
BSG8ew
Cable-management tray
"BSG8ew in a wall-mount bracket" on page
Hardware overview
21.
Wall-mount bracket
Antenna adapter
Installation
21