Lan Port Leds; Bsg8Ew Link Activity Leds - Nortel BSG12aw Installation Manual

26 LED functionality

LAN port LEDs

Each BSG unit has an LED that indicates link activity. Each BSG12ew/aw/tw unit has an
additional LED that indicates whether power over internet (PoE) is enabled.

BSG8ew Link Activity LEDs

Each LAN port on the BSG8ew/12ew/aw/tw has one LED that indicates link activity. This LED
turns on when an Ethernet cable is connected to the corresponding port. For more information
about the LEDs, see
BSG8ew link activity LEDs
The following table shows the status of link activity for the BSG8ew LAN port LED:
Link/Act LED Status
Green On
Green Flashing
Green Off
Amber On
Amber Flashing
Amber Off
The following table shows the status of link activity for the BSG8ew GigE (port 8) LED:
Link/Act LED Status
Green On
Green Flashing
Green Off
Amber On
Amber Flashing
Amber Off
NN47928-302 NN47928-302
"BSG8ew link activity LEDs" on page 26
Description
The WAN/ LAN port is Link Up at 100 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
The WAN/ LAN port is Link Up at 10 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
Description
The LAN port is Link Up at high speed (1000 Mb/s).
The LAN port is sending or receiving data.
The LAN port is not operating.
The LAN port is Link Up at low speed (100/10 Mb/s).
The LAN port is sending or receiving data.
The LAN port is not operating.
and the following table.
Link activity LEDs