ADSL WAN module replacement
The following sections describe how to replace the ADSL WAN module in a Business Services
Gateway 12-port (BSG12aw).
ADSL WAN module replacement navigation
•
"Saving the running configuration to Flash using the WebUI" on page 55
•
"Saving the running configuration to Flash using the CLI" on page 56
•
"Replacing the ADSL WAN module" on page 56
•
"Verifying the ADSL WAN module status" on page 57
Prerequisites to ADSL WAN module replacement
•
If the system is still operating, perform the procedure
aw/tw" on page
•
Obtain an ADSL WAN Replacement Module (NT5S21ZCE6) for the BSG12aw from
Nortel.
•
Ensure you have the following items available:
— an antistatic wrist grounding strap
— a Phillips screwdriver
— grounding source
Caution: Risk of equipment damage
You must wear an antistatic grounding strap at all times when handling
electronic components. Failure to do so can result in damage to the equipment.
Saving the running configuration to Flash using the WebUI
Use this procedure to save the running configuration using the WebUI.
Procedure steps
Step
1
2
3
63.
Action
From the BSG12aw logon page, log on using the user ID and password.
From the left-hand navigation panel, select Administration, Configuration
File, Save.
Click Apply.
"Shutting down the BSG8ew/12ew/
End
55
Installation